HDPE Geomembrane Manufacturer & Geosynthetics Supplier
100% virgin-resin HDPE and LLDPE liners plus PET non-woven geotextiles, extruded on 8 m flat-die lines and batch-tested to GRI-GM13 before every shipment.
Years of geosynthetics manufacturing
Products supplied per year
Countries and regions served
HDPE geomembrane capacity
Geomembrane Liners & Non-Woven Geotextiles
HDPE Geomembrane Liner
Virgin geomembrane-grade HDPE in smooth, single-sided and double-sided textured surfaces for landfills, mining, reservoirs and secondary containment.
Verified Performance Data
Stress crack resistance (ESCR)ASTM D5397
High-pressure OIT stabilityASTM D5885
Thickness tolerance, full rollASTM D5199
UV retention at 1,600 h exposureASTM D7238
Chemical resistance rangeAcidic to alkaline exposure
Design service life, buriedArrhenius aging simulation
Where Jinseed Liners Work
Mining & Heap Leach
Heap leach pads, tailings facilities and process solution ponds.
Landfill & Waste
Base liners, leachate ponds, caps and hazardous waste containment.
Aquaculture
Food-grade pond liners for fish and shrimp farming operations.
Hydraulic Engineering
Reservoirs, irrigation canals, dams and water storage systems.
Civil Engineering
Road subgrade separation, tunnel waterproofing and erosion control.
Environmental Protection
Tailings storage, wastewater lagoons and remediation containment.
In-House Manufacturing, Batch by Batch
Virgin resin only, COA with every batch
Geomembrane-grade HDPE from Sabic, Chevron Phillips and Borealis. Zero recycled content; every lot passes DSC and MFR checks before silo loading.
8 m flat-die extrusion lines
German-engineered calendering lines with laser thickness scanning and spark pinhole detection keep gauge and surface consistent across the full roll.
In-house laboratory release testing
Tensile, tear, puncture, carbon black and OIT tested on every production batch against GRI-GM13 and GRI-GM17 before release.
Full roll traceability
Each roll carries a thermal-printed label with thickness, dimensions, batch ID and raw-material MTR reference. Retained samples stay on file.
Batch Testing Before Every Shipment
Geomembrane — GRI-GM13 / GM17
Non-Woven Geotextile
From Resin to Certified Roll
Virgin Resin Sourcing
Tier-1 resin with original Certificate of Analysis for full traceability.
Feedstock Validation
QA sampling for melt flow rate and density against internal specifications.
In-Line Thickness Control
Closed-loop ultrasonic monitoring keeps deviation within ±3%.
Roll Audit & Logging
Dimensions, extrusion temperatures and line speed recorded per batch.
Laboratory Release
ASTM and GRI-GM13 / GM17 batch testing before any shipment leaves.
Installation Standards We Ship With Every Roll
Subgrade Preparation
Overlap Control
Seam Welding
Seam Testing
Proven in the Field
High-Friction Heap Leaching in the Andes
1.5 mm textured HDPE with 600 g/m² PET geotextile stopped liner slippage on steep slopes and raised leaching efficiency through leak elimination.
Long-Term Waste Containment
2.0 mm smooth HDPE to ASTM D6693 with high-OIT stabilization for tropical humidity — engineered for five decades of zero leachate seepage.
Zero-Toxin Aquaculture Ponds
0.5 / 0.75 mm food-grade LLDPE from 100% virgin resin removed heavy-metal leaching risk and lifted survival rates versus traditional ponds.
Certifications & Third-Party Verification
ISO 9001:2015 Quality Management
Data-driven production workflows audited under ZCC and CNAS-accredited supervision — accepted for large-infrastructure supplier qualification.
IGS Corporate Member
Active member of the International Geosynthetics Society, aligned with current international technical specifications.
Independent Verification Welcome
On-site sampling and sealed-witness testing supported through SGS, Intertek, BTTG and TRI Environmental, alongside our GAI-LAP accredited in-house laboratory.
Packaging, Logistics & Warranty
Triple-Layer Roll Protection
Rolls wound on 10 mm+ reinforced cores, wrapped in dual UV-stabilized PE layers and a tear-resistant woven jacket for sea freight and site storage.
Container Loading Report
Roll lengths planned around 20GP / 40HQ utilization; every shipment documented with photos, integrity checks and verified seal numbers.
Warranty 10–20 Years
Written warranty agreements matched to the application environment, with service life beyond 50 years in buried conditions.
Custom Widths to 8 m
Project-based roll width and length cut field joints, shorten installation time and lower welding risk on site.
Frequently Asked Questions
What is your minimum order quantity?
Trial orders for regular specifications start from 1–3 tons. For export shipments we recommend at least one 20GP container, which gives a more competitive cost per square meter. Customized thickness, width or roll length may carry a higher MOQ depending on production scheduling.
How long is your lead time?
Standard products are usually produced within 7–15 days after specifications are confirmed and the deposit is received. Customized orders, mixed-container loading or peak-season production typically take 15–25 days. The delivery schedule is confirmed before mass production.
What thickness range do you offer?
The commonly requested geomembrane range is 0.75 mm to 3.0 mm, with PET non-woven geotextiles from 100 to 1,200 g/m². Custom roll width and roll length are supported to reduce seam quantity and improve installation efficiency on site.
Do you provide test reports and technical data sheets?
Yes. We provide Technical Data Sheets and batch-specific test data covering thickness, tensile properties, puncture resistance and other key values required for project approval and procurement review. Third-party witnessing through SGS, Intertek, BTTG or TRI Environmental can be arranged.
Can specifications be customized for my project?
Yes. Thickness, width, roll length, surface type and packing marks can all be adjusted to project requirements. For large projects we recommend confirming the specification sheet before production to reduce procurement risk and avoid repeated revisions.
What information do you need for a quotation?
Six details are enough: product type, thickness or weight, roll size, order quantity, destination port and application. If you also share drawings, technical standards or tender requirements, we can usually cut one to three rounds of communication and quote more accurately.
Send Your Specification, Get a Project Quotation
Share your application, thickness, quantity and destination — our engineers reply with pricing, roll configuration and the applicable test documentation.